Servo-controlled by micro-computer; quite operation windows can reduce the disturbance to the baby during nursing; touch switch panel with LED digital display, set-temp, real-temp are displayed separately; multiply self-checking alarms with audible and visible; heating power rate indicates 0-100%.
Standard configuration:
Hood, infant bed, temperature controller, water tank, air filter, blue light radiant box, I.V. Pole, stand.
Technical specification:
Power supply : AC110V, 60HZ
Power input: 600VA
Air Temperature control range: 25ºC~37ºC
Changing of temperature: ≤0.5ºC
Uniformity of temperature: ≤0.8ºC
Temperature rising time: ≤45min
Noise level: ≤55dB(A)
Alarms
Audible and visible alarm indication, and it can indicate the real temperature and cut off the power supply of heater.
Over-temp alarm: when the temperature control ≤38ºC
Deviation alarm:±3ºC
Sensor alarm: when the sensor is disconnected, open circuit, short circuit or put on the wrong place
Fan alarm: when the fan is blocked, speed ≤1000rpm or stop working
Power failure alarm: when there is no power or the power cord is disconnected.
System alarm: when there is E2ROM malfunction inside of temperature controller.