English Spanish     Home  About  Contact  Find Us  Search
Category Listing  Aesthetic  Anesthesia  Blog  Cardiology  Defibrillators  Diapulse Brochure  Emergency  Endoscopy  Imaging  Instrumentation  IV Poles  Laboratory  Lamps / Lights  Medical Furniture  Miscellaneous  Neonatal   Blanket Warmer   Feeding Pumps   Incubators   Infant Warmers   Phototherapy  Neurology  OB/GYN  Ophthalmology  Packages  Pain Relief Cream  Patient Monitoring  Pediatric  Physical Therapy  Pumps  Respiratory  Sterilizer  Surgery  Survey  Vascular  Videos  Wound Care	Neonatal Air-Shields Infant Intensive Care System  Product Detail Model: IICS90 Temperature Control Our systems offer reliable excellence in thermal performance. Each Warmer in the Air-Shields products family provides focused heater output across the mattress to achieve uniform temperature distribution. Combined with a quartz heating element, our systems are optimized for fast, reliable heating on demand. The warming module head can be moved 65 in either direction to facilitate other procedures such as x-ray, without interrupting thermal operation. Intuitive Operation The large, bright displays can be seen from a wide angle, and all controls are designed for logical, intuitive operation. Variable Height Adjustment (VHA) The VHA option maximizes comfort for clinicians or parents seated at bedside. At maximum height, the patient is positioned appropriately for ECMO procedures. Variable Bassinet Tilt All bassinets include a smooth operating mattress tilt. Side Panels An organizer panel at the rear of the bassinet supports efficient cable management. Each panel can be opened or removed for cleaning. Each panel is marked to optimize positioning of x-ray cassette. Storage Options A selection of storage options are available, including various configuration of shelves, and drawer modules to suit your hospital’s needs. Phototherapy Option Air-Shields IICS-90’s integrated phototherapy system ensures that optimal therapeutic output is available on demand–without having to disturb the patient or move other equipment. Resuscitation A comprehensive range of resuscitation packages is available. The convenient location places all controls and displays readily accessible for Caregivers at all times. Warm Weigh Infant Scales At the touch of a button an accurate measurement of the infant’s weight may be taken with the optimal in-bed scale module. A re-weigh feature enables subsequent weights to be taken, with reduced disturbance to the infant. Remote Alarm Module Takes the audible alarm tone away from the infant area and also displays alarm violations in a remote location promoting a low-noise, stress free environment. The remote alarm will initiate alarm violations at a lower intensity, and will only increase if unattended. X-Ray Facility A conveniently located x-ray cassette tray enables x-rays to be taken with minimal disturbance to the patient. Specifications: Power requirements: 100 V AC, 50/60 Hz, 680 W Power requirements with VHA: 110/120 V AC, 50/60 Hz, 680 W, 220/240 V AC, 50/60 Hz, 680 W Leakage current: 100 V, 120 V models: <300 µA 220 V-240 V models: <500 µA Heating element: Quartz (600 W) Examination light: 100 ft. candles at center mattress 1076 lux; 100 lumens per sq. ft. Skin temperature display: Digital LED with 0.1 C Resolution Skin temp. variability: 0.2 C at temperature equilibrium Mattress tilt: ± 6 ° Heater module swivel: ± 65 ° Casters: 5” (Free Standing Warmer has 3 casters 2”) Mattress size in (cm): 29.5 (75) x 23.5 (59.7) Ambient operating temp: 68F (20 C) - to 86F (30 C) Humidity: 0 - 95% Altitude: Sea level to 1.9 miles (3 km) Control modes: Skin Mode and Manual Mode (0-100% in 25% increments) Skin mode control range: 34.0 ° C - 37.9 ° C Silence/reset: Silences audible alarms for 15 minutes Resets (clock) in Manual mode Manual mode: After 10 minutes of operation, an audible “chirp” tone (Manual Alert) will sound every 30 seconds. The heater may then be reset for an additional 15 minutes without the heater turning off by pressing the Silence/Reset Switch. If the circuit is not reset, the heater is automatically turned off when 15 minutes of operation have elapsed, the MANUAL Indicator lights steady, and the alarm sounds. Alarms: Probe Fail, Power Fail, Set Point (Skin Mode ± 1.0 C) Remote alarm option: Initiates large red lamp for alarm conditions Standard with VHA modules: Initiates low volume audible which increases if unattended Phototherapy option: Light output: 9 µW/cm2/nm Bulb type: 50 W Quartz Halogen White Light Power requirements: 100 V AC, 50/60 Hz, 440 W 110/120 V AC, 50/60 Hz, 440 W 220/240 V AC, 50/60 Hz, 440 W Overload protection: 100V and 110/120V models: One 10A Circuit Breaker (on Power Module of associated equipment) 220/240V models: One 13A Circuit Breaker (on Power Module of associated equipment) Chassis leakage current: 100,120V models: <300 µA 220/240 models: <500 µA Physical: IICS-90 VHA Height Low: 75 in (190.5 cm) Height High: 87 in (221 cm) Width: 28 in (71 cm) Depth: 49 in (124 cm) Weight, lb (kg): 447 lb (202 kg) Mattress Height - Low: 38 in (96 cm) Mattress Height - High: 49 in (124 cm) IICS-90 Height Low: 76.75 in (195 cm) Height High: 79in (201 cm) Width: 28 in (71 cm) Depth: 46 in (117 cm) Weight, lb (kg): 226 lb (102.6kg) Mattress Height - Low: 38 in (96 cm) Mattress Height - High: 40.5 in (102.8 cm) Free Standing Warmer Height Low: 71 in (180 cm) Height Mid: 74 in (188 cm) Height High: 77 in (195 cm) Width: 28 in (71 cm) Depth: 38.5 in (98 cm) Weight, lb (kg): 103 lb (47 kg) Request Info Enlarged Picture Back
Join the Life Medical Equipment mailing list Email:  7874 NW 64th Street,  Miami, Florida, 33166 Tel: (305) 594-0000 - Fax: (305) 594-2020 - © Copyright 2007 - Life Medical Equipment International Inc.