English Spanish     Home  About  Contact  Find Us  Search
Category Listing  Aesthetic  Anesthesia  Blog  Cardiology  Defibrillators  Diapulse Brochure  Emergency  Endoscopy  Imaging  Instrumentation  IV Poles  Laboratory  Lamps / Lights  Medical Furniture  Miscellaneous  Neonatal   Blanket Warmer   Feeding Pumps   Incubators   Infant Warmers   Phototherapy  Neurology  OB/GYN  Ophthalmology  Packages  Pain Relief Cream  Patient Monitoring  Pediatric  Physical Therapy  Pumps  Respiratory  Sterilizer  Surgery  Survey  Vascular  Videos  Wound Care	Neonatal Transport Incubator  Product Detail Model: INC-LME-TI20 Features: Air-temp or skin-temp, servo controlled by Micro-process Automatic adjust power supply AC / DC or ambulance power supply With isolated alarm system, it will be automatic running as soon as the normal alarm system broken With specially connector for ambulance power supply. With super long trolley for assembly necessary medical device (patient monitor, infusion pump, etc.) Six quiet operate iris port Heating power rate 0-100% Double wall prevent heat losing The access panel can open in two side for draw out the bassinet from hood. The chamber hood can whole move, convenient for any rescue operating. Gradient of the bassinet can be adjusted in two step Trolley stand can pucker, and suitable for ambulance delivery. Standard Accessories: Trolley stand puckerable IV Pole Skin Sensor Air Filter Mattress Safe keep belt Iris port cover Battery free maintenance Fuse 2.5A Power cord Operator manual Installation tools Specifications: Power Supply AC: AC110V~230V, 50Hz~60Hz, 200VA max. or less DC: DC12V, 150VA max or less, DV24V, 150VA or less Normal: <0.5mA Single Fault State: <1mA According to IEC601-1, the unit is class I, BF type, internal power supply unit. Internal Battery Type: Topin TP12-26 Battery Quantity: 2 Voltage: 12V / 26 AH Charge Time (from full discarge): One battery: 12 hours Two battery: 24 hours Life Expectancy: 200 complete charge / discharge cycles Work time at temperature equilibrium: 45 min (1 battery). 90 min (2 batteries) Battery's length: 17.5 cm Battery's width: 16.6 cm Battery's height: 12.6 cm Battery's weight: 9.1 kg Ambient temperature (Normal) Operating range (limited): 0-40° C Storage range: 40 - 70° C Ambient humidity Operating range: 30% ~ 75%RH non-condensing Storage range: < 95%RH non-condensing Atmospheric pressure Atmosphere pressure range when transport or storage: 500hPa ~ 1060hPa Operating atmospher pressure range: 700hPa ~ 1060hPa Air Flow Ambient air flow: Less 1.0 m/s Temperature control range with relative guideline Air temperature control mode: 25~37°C Skin temperature control mode: 34~37°C Temperature rise time (ambient temperature 25°C): < 30 minutes Temperature variability: < 1°C Temperature uniformity (Mattress in lever): < 1.5°C Correlation of displayed incubator temperature to actual incubator temperature at temperature equilibrium: <0.7°C Skin sensor accuracy: <0.1°C Alarms Power Fail (Power Failure): Actuates if main AC power fails and no DC back-up power is present or switching to battery power. Fan Alarms: Motor trouble or fan rotate speed less low or fan stop DC Low Voltage Alarms: DC 12V or Battery supply low 10.5V or DC24V low 22.5V Sensor Alarms: Actuates if there is a sensor failure or skin sensor isn't placed in right place Temperature deviation alarm: Air temperature or skin temperature too high or air temperature or skin temperature too low. Over-temperature alarm: Temperature too high in hood under air temperature control mode or skin temperature control mode. E Rom trouble alarms: Within temp controller system trouble Whole equipment physical dimensions Length: 170 cm Width: 50 cm Incubator body weight (including 2 batteries: 80 kg Stand weight: 25 kg The max. force load of the IV Pole: 20N The max. force load of the mattress: 98N Mattress's length: 63 cm Mattress's width: 35 cm Other specifications Noise level within the hood environment: <60dB(A) With ambient of equal or less than 50Dba Carbon Dioxide (CO2) Lever within the hood: Less than 0.5% when a 4% mixture of CO2 in air is delivered at 750 ml / min at a point 10 cm above the center of the mattress Air flow above mattress: <0.35m/s Incubator service life: Incubator's use life is limited, generally 8 years, but it is according to every incubator different using frequency, operational status and environment of working and storage. The service life will be changed. Factory's Default Setting: Temperature control mode: Air control mode Air set temperature: 32°C Skin set temp: 34°C Temperature unit: °C Request Info Enlarged Picture Back
Join the Life Medical Equipment mailing list Email:  7874 NW 64th Street,  Miami, Florida, 33166 Tel: (305) 594-0000 - Fax: (305) 594-2020 - © Copyright 2007 - Life Medical Equipment International Inc.