EKG, NIBP, SpO2, Blood Pressure, Temperature, REcorder and Tocuh Screen
EKG, Respiratory Rate, Blood Pressure, Temperature, NIBP or SpO2
Specifications
Physical
Height: 10.3" (26.2 cm)
Depth: 10.1" (25.7cm)
Weight: 13.5 lbs (6.1 kg)
Power
Voltage/Frequency Requirements: 115 VAC nominal mains at 50-60 Hz or 230/240 VAC mains at 50-60 Hz. All external mains-powered equipment must be grounded to the grounding connector on the rear panel.
Power Consumption: 33 watts typically with tow modules installed.
Fuse Ratings: Two T2.5A fuses for 115 VAC or two T1.6A for 230-240 VAC operation are accessible through the monitor's AC input receptacle.
Display
Resolution: 640 x 400 pixels.
Area: 7.69" (19.5 cm) wide x 4.8" (12.2 cm) high
Sweep Speed: Under module control.
Graphic Trends: Time Frames: 1, 2, 6, 12, and 24 hours.
Trend Resolution: One minute data resolution
Frame Rate: 56 frames/second, non-interlaced.
Batteries
Type: 2/3 A Hr @ 12V VCR type sealed lead-acid battery. The monitor can house up to three batteries, providing up to 2.5 hours of operation. Batteries may be charged during battery or AC operation without losing data, as long as one charged battery remains plugged in during the exchange. A triple-stage battery charger charges batteries up to 80% capacity in 80 minutes, 1005 capacity in 3 hours. Charger operation is automatic when the unit is connected to an AC supply with the rear panel mains switch ON. The AC power indicator on the front panel will be illuminated.